Saturday, March 27, 2010

Shoring - Stegger Bekisting Plat produk PERI PEP 10 Prop

PEP 10 Props

PEP 10 PropsPEP 10 PropsPEP 10 PropsMore images

Light and easy to handle

Crosshead PEP 10 / VT 20:
Lightweight, designed for fast assembly on PEP 10 props. The crosshead PEP 10 / VT 20 is slotted into the prop and automatically locks into position when turned.

Tripod PEP 10:
The PEP 10 tripod serves as an assembly aid for props Ø 44 to 64 mm.

Advantages
  • High loading capacity
    Low weight but with a high loading capacity
    PEP 10-300: G=11.8 kg perm. F=10.0 kN (according to EN1065 when fully extended)
  • Adjusting nut
    Adjusting nut with a new type of lowering nibs as well as a control lever which guarantees a careful lowering procedure.
  • Stamped measuring scale
    For faster adjustment of the prop length. Numbers stamped on the inner tube show the total length in increments of 100 mm.
  • Generous adjustment range
    The large adjustment range makes frequent pin adjustment unnecessary.
  • No comments:

    Post a Comment