Sunday, March 21, 2010

Semen Tiga Roda Indonesia

    Ordinary Portland Cement (OPC) Jenis I

    Indonesian Standard : SNI 15-2049-2004
    American Standard : ASTM C 150-04a
    European Standard : EN 197-1:2000

    Semen Portland Jenis I merupakan jenis semen yang cocok untuk berbagai macam aplikasi beton dimana syarat-syarat khusus tidak diperlukan.

    Portland Cement Type I is the type of cement is suitable for a variety of concrete applications where special conditions are not necessary


    Ordinary Portland Cement (OPC) Jenis II

    Indonesian Standard : SNI 15-7064-2004
    American Standard : ASTM C 150-04a

    Semen Portland Jenis II merupakan jenis semen yang cocok untuk berbagai macam aplikasi beton dimana diperlukan daya tahan yang baik terhadap kadar sulfat sedang.

    Semen jenis ini banyak digunakan di daerah-daerah yang berkadar sulfat sedang, misal daerah-daerah rawa dan bangunan-bangunan tepi pantai, bendungan, pondasi jembatan dll.


    Type II Portland cement is a type suitable for a variety of concrete applications where durability is required either to sulfate levels were.

    This type of cement used in areas that yield sulphate was, eg swamp areas and buildings, beach, dam, bridge foundation, etc..




    Ordinary Portland Cement (OPC) Jenis V

    Indonesian Standard : SNI 15-2049-2004
    American Standard : ASTM C 150-04a

    Semen Portland Jenis V merupakan jenis semen yang cocok untuk berbagai macam aplikasi beton dimana diperlukan daya tahan yang baik terhadap kadar sulfat yang tinggi.

    Semen jenis ini banyak digunakan di daerah-daerah yang berkadar sulfat tinggi, misal daerah-daerah rawa dengan tingkat keasaman tinggi, dermaga (bangunan-bangunan pantai), bendungan, pondasi jembatan, silo bahan-bahan kimia dll.

    Type V Portland cement is a type suitable for a variety of concrete applications where durability is required either to high sulfate levels.

    This type of cement used in areas that yield high sulfate, eg swamp areas with a high acidity level, the pier (coastal buildings), dam, bridge foundations, silos chemicals etc..



    Portland Composite Cement (PCC)

    Indonesian Standard : SNI 15-7064-2004
    European Standard : EN 197-1:2000 (42.5 N & 42.5 R)

    PCC (Portland Composite Cement) digunakan untuk bangunan-bangunan pada umumnya, sama dengan penggunaan Semen Portland Jenis I dengan kuat tekan yang sama.

    PCC mempunyai panas hidrasi yang lebih rendah selama proses pendinginan dibandingkan dengan Semen Portland Jenis I, sehingga pengerjaannya akan lebih mudah dan menghasilkan permukaan beton/plester yang lebih rapat dan lebih halus.

    PCC (Portland Composite Cement) is used for buildings in general, similar to the use of Portland Cement Type I with a strong press the same.

    PCC has a hydration heat lower during the cooling process compared to Portland Cement Type I, so that the process will be easier and produce concrete / plaster that more meetings and more subtle.






    Oil Well Cement (OWC) / Semen Sumur Minyak

    American Standard : API Spec 10A Class G-HSR

    Oil Well Cement (OWC) digunakan untuk penyekat pada pengeboran sumur minyak. Oleh karenanya semen jenis ini juga disebut semen sumur minyak.

    Sumur-sumur minyak atau gas dibuat dengan mengebor lubang ke dalam tanah / bumi dengan kedalaman ratusan sampai dengan 20.000 kaki (sekitar 7.000 meter). Pipa besi yang disebut casing ditempatkan pada lubang sumur dan semen dipompa ke bawah melalui pipa tsb.

    Sewaktu semen terpompa keluar melalui dasar casing tsb. dan kembali ke permukaan melalui bagian luar casing, ia akan membentuk ikatan kritis antara bagian luar casing dengan dinding sumur yang telah dibor. Ikatan ini akan melindungi minyak, gas dan air bawah tanah sehingga tidak bercampur di dalam sumur tsb.

    Kekokohan semen tergantung pada serangan sulfat dengan kadar, suhu dan tekanan yang tinggi selama proses pemompaan berlangsung. Dikarenakan keharusan waktu pemekatan yang ketat, maka OWC diproduksi dengan standar mutu yang ketat sesuai dengan standar API (American Petroleum Institute).


    Oil Well Cement (OWC) is used for insulation on oil well drilling. Therefore this type of cement is also called cement oil wells.

    Oil wells or gas is made by drilling holes into the soil / earth to depths of hundreds of up to 20,000 feet (about 7,000 meters). Iron pipe, called casing placed in the well hole and cement is pumped down through the pipe.

    When cement pumped out through the bottom casing tsb. and return to the surface through the outer casing, it will form a critical bond between the outer casing to the walls of wells have been drilled. This bond will protect the oil, gas and underground water that is not mixed in the wells.

    Robustness of cement depends on the levels of sulfate attack, temperature and high pressure during the pumping process in progress. Due to the necessity of strict concentration time, the OWC produced with strict quality standards in accordance with the standard API (American Petroleum Institute).




    White Portland Cement (WPC) / Semen Portland Putih

    Indonesian Standard : SNI 15-0129-2004
    American Standard : ASTM C 150-04a

    White Portland Cement (WPC) / Semen Portland Putih merupakan jenis semen bermutu tinggi. Semen Portland Putih terutama digunakan untuk keperluan pekerjaan-pekerjaan arsitektur, precast dan beton yang diperkuat dengan fiber, panel, permukaan teraso, stucco, cat semen, nat ubin / keramik serta struktur yang bersifat dekoratif.

    Semen Portland Putih dibuat dari bahan-bahan baku pilihan yang rendah kandungan besi dan magnesium oksidanya (bahan-bahan tsb. menyebabkan semen berwarna abu-abu). Derajat keputihannya diukur menurut standar yang berbeda-beda, namun mutu Semen Portland Putih ITP mencapai angka sekitar 85 dengan menggunakan metode Kett C-1.

    Semen Portland Putih dapat juga digunakan untuk proses konstruksi pada umumnya dan saat ini merupakan satu-satunya Semen Portland Putih produksi dalam negeri.



    White Portland Cement (WPC) / White Portland Cement is a kind of high-quality cement. White Portland Cement is mainly used for architectural work, precast concrete and reinforced with fiber, panels, terrazzo surfaces, stucco, cement paint, tile grout / ceramic and decorative structures.

    White Portland Cement is made from raw materials selection low iron content and magnesium oxide (the material cause cement gray). Keputihannya degrees measured by the standards of different, but the quality of White Portland Cement ITP reached about 85 by using the method Kett C-1.

    White Portland cement can also be used for the construction process in general and currently the only White Portland Cement production in the country.



    White Mortar TR30


    White Mortar TR30 merupakan produk terbaru Tiga Roda yang sangat sesuai untuk Acian, Plamir dan Nat.

    Keuntungan menggunakan White Mortar TR30 antara lain dapat menghasilkan permukaan acian yang lebih halus, mengurangi retak dan terkelupasnya permukaan karena mempunyai sifat plastis dengan daya rekat tinggi, cepat dan mudah dalam pengerjaan, hemat dalam pemakaian material serta dapat digunakan pada permukaan beton dengan menambahkan lem putih.


    White Mortar TR30 is a new product that Three Wheels are suitable for Aci (plaster finish), Plamir and Nat.

    Advantages of using White Mortar TR30 include acian can produce surface (plaster finish) is more subtle, less fractured and has terkelupasnya surface because the plasticity with high adhesive power, quickly and easily in workmanship, efficient in the use of materials and can be used on concrete surface with add the white glue.

No comments:

Post a Comment